TERMINAL SETUP
40
9.
Enter the Wait Time.
After entering the Wait Time by digit key,
press or Soft key (OK).
The display goes back to the [Screen
Saver] screen.
TO ENABLE/DISABLE
LCD BACK LIGHT
Following explains how to turn On/Off of the LCD
Back light.
1.
Press key to display the Menu
Screen.
2.
Select “Setting”.
Highlight an item by using , and press
.
3.
Select “ User Setting”.
Select one of the following operations.
Highlight an item by using , and
press , or Soft key (OK).
Press .
4.
Select “ Display”.
Select one of the following operations.
Highlight an item by using , and
press , or Soft key (OK).
Press .
5.
Select “ Back Light”.
Select one of the following operations.
Highlight an item by using , and
press , or Soft key (OK).
Press .
6.
Select whether to turn On/Off of the
LCD Back light.
Select one of the following operations.
Highlight an item by using , and
press or Soft key (OK).
Press or , and press or
Soft key (OK).
The lighting time of back light is set by
system data setting at initial installation.
(The initial setting is 10 seconds.) For
details, please contact the system
administrator.
TO ENABLE/DISABLE
LCD BACKLIGHT FADE
CONTROL
Following explains how to set Backlight Fade
To Next Page
Loading...
