NEC Univerge SV9300 - Whisper Page

FEATURE OPERATION
90
 Press or and dial desired time.
IN:BACK
11:00 AM SUN 1 JUN 2014
Recall
PICK
>>>>
 Press or and dial the month
and date (Example: for June, 8, enter
“0608”).
AWAY:BACK
11:00 AM SUN 1 JUN 2014
Recall
PICK
>>>>
4. Press Speaker key.
Speaker key lamp goes off. →
Return Message Schedule is registered.
TO CANCEL
1. Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2. Dial Return Message Schedule
cancel code.
3. Press Speaker key.
Speaker key lamp goes off. →
WHISPER PAGE
This feature allows a secretary to interrupt the
boss in a private way. By pressing a feature key
or dialing an access code, the secretary terminal
can interrupt the conversation between the boss
and another party. When the conversation is
interrupted, the boss can hear the secretary but
the other party is unaware of the voice override.
The feature access code/feature key is
set by system data setting at initial
installation. For details, please contact
the system administrator.
TO SET
Whisper Page has two kinds of operations.
PATTERN 1
1. Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2. Dial desired extension number.
You will receive a busy tone.
BUSY 201
11:00 AM SUN 1 JUN 2014
CB
CW
>>>>
3. Press Transfer key.
11:00 AM SUN 1 JUN 2014
CB
CW
>>>>
4. Dial Whisper Page access code or
press Whisper Page feature key.
You will receive a service set tone.
201
11:00 AM SUN 1 JUN 2014
Recall
VOICE
CB
>>>>
5. Listen to conversation and speak to
boss terminal only.
CALL WAITING 201
11:00 AM SUN 1 JUN 2014
MIC
CONF
Recall