FEATURE OPERATION
78
4.
The original call rings back.
Call Indicator Lamp flashes red.
Line key lamp flashes green. →
5.
Lift the handset to restart a
conversation.
Line key lamp lights green. →
STATION HUNTING
When a busy terminal which is assigned Station
Hunting pilot number is called, this feature
permits the incoming call to be routed to another
terminal within the hunt group.
The terminal that is set the Station
Hunting feature and the pilot number
are set by system data setting at initial
installation. For details, please contact
the system administrator.
You cannot set Call Back, Call Waiting,
or Executive Override to the pilot
number of the hunt group.
1.
Lift the handset.
Line key lamp lights green. →
2.
Dial the desired number.
If the pilot number is busy, the call is
routed to another terminal within the
hunting group.
3.
Start conversation with called party.
STEP CALL
This feature allows the terminal user, after calling
a busy terminal, to call an idle terminal by simply
dialing an additional digit.
The feature is set by system data
setting at initial installation. For details,
please contact the system
administrator.
1.
Lift the handset.
Line key lamp lights green. →
2.
Dial the extension number.
You will receive a busy tone.
3.
Dial the last digit (0-9) of another
terminal.
Example: Dial “2”.
To Next Page
Loading...
