FEATURE OPERATION
71
3.
Dial desired number.
4.
The called party answers.
Press Mic key or Soft key (MIC).
Mic key lamp lights red. →
Talk toward the mic.
TO ANSWER A CALL WITH
HANDSFREE
1.
The Call Indicator Lamp flashing.
Line key lamp flashes red. →
2.
Press Speaker key.
Speaker key lamp lights red. →
Line key lamp lights green. →
3.
Talk toward the mic.
When you make a call handsfree,
please note the following items.
Avoid using in a place where there
is a lot of echo or noise.
The Microphone is located at the
front of the terminal. It should be
no further away than 50 cm.
When talking handsfree, be aware
of the volume level as to not
disturb people close to you.
Talk alternately with the other
party. The voice may be
interrupted if both party talk at the
same time.
CALL PICKUP - GROUP
This feature permits a terminal user to answer
any calls directed to other extensions in their
preset pickup group.
This feature is set by system data
setting at initial installation. For details,
please contact the system
administrator.
This feature is set by Soft key or feature
key. The feature key is set by system
data setting at initial installation. For
details, please contact the system
administrator.
1.
Ringing terminal in your Call Pickup
- Group.
2.
Press Speaker key.
Speaker key lamp lights red. →
Line key lamp lights green. →
To Next Page
Loading...
