NEC Univerge SV9300 - Last Number Redial

FEATURE OPERATION
65
3. Dial the destination extension
number.
You will receive a dial tone.
The dialed extension number is displayed
with flash.
210
11:00 AM SUN 1 JUN 2014
Recall
VOICE
>>>>
4. Replace the handset.
Line key lamp goes off. →
A call is transferred.
ANSWER TO A TRANSFERRED CALL (BY
EX. 210)
1. Ringing is heard.
Call Indicator Lamp flashes.
Line key lamp flashes red. →
The extension number that initiates call
transfer is displayed on the LCD.
200
11:00 AM SUN 1 JUN 2014
R-TONE
MIC
2. Lift the handset and start
conversation with transferred party.
Call Indicator Lamp goes off.
Line key lamp lights green. →
0:00:05 DDD
11:00 AM SUN 1 JUN 2014
MIC
Mute
When the destination party does not
answer within the predetermined time, a
recall is made to the terminal that
initiates call transfer. When recall is
received, the destination number is
displayed on the LCD.
RECALL 210 DDD
11:00 AM SUN 1 JUN 2014
MIC
DIR
HIST.
>>>>
LAST NUMBER REDIAL
It is possible to search and redial the phone
number up to 60 calls previously dialed.
1. Press or Soft key (OG) after
press Soft key (HIST.) .
Speaker key lamp lights red. →
Line key lamp lights green. →
[Outgoing Calls] 01
1 JUN 11:00 JOHN SMITH
81XXXXXXXXXX
<<<<
Redial
↑
Prev
↓
Next
2. Press Soft key (￪Prev) or Soft key (￬
Next) to find desired number and
press .
The number on LCD is automatically
redialed.
81XXXXXXXXXX
11:00 AM SUN 1 JUN 2014
Recall
VOICE
CB
>>>>