FEATURE OPERATION
64
INITIATE TRANSFER (BY EX. 200)
1.
Call in progress.
Line key lamp lights green. →
2.
Press Transfer key.
You will receive a special dial tone.
Calling party is placed on hold.
3.
Dial the destination extension
number.
You will receive a dial tone.
The dialed extension number is displayed
with flash.
4.
Destination extension answers
transferred call.
After the answer, announce the call is
transferred.
5.
Replace the handset.
Line key lamp goes off. →
A call is transferred.
ANSWER TO A TRANSFERRED CALL (BY
EX. 210)
1.
Ringing is heard.
Call Indicator Lamp flashes.
Line key lamp flashes red. →
The extension number that initiates call
transfer is displayed on the LCD.
2.
Lift the handset to start a
conversation with the extension
(200).
Call Indicator Lamp goes off.
Line key lamp lights green. →
3.
Start conversation with transferred
party.
Extension (200) replaces the handset.
TO TRANSFER A CALL
(WITHOUT
ANNOUNCEMENT)
After dialing the transfer destination number, it is
possible to replace a handset before answering
the destination party. When the transfer
destination party lifts the handset, it is
automatically connected with transferred party.
The phone number of transferred party is
displayed on the destination terminal.
INITIATE TRANSFER (BY EX. 200)
1.
Call in progress.
Line key lamp lights green. →
2.
Press Transfer key.
You will receive a special dial tone.
Calling party is placed on hold.
To Next Page
Loading...
