NEC Univerge SV9300 - Page 54

TERMINAL SETUP
46
2. Select “Setting”.
Highlight an item by using , and press
.
3. Select “ Download”.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press .
4. Select “ Protocol”.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press .
5. Select a protocol type of the server
which stores the download file.
Select one of the following operations.
 Highlight an item by using , and
press or Soft key (OK).
 Press , or , and press
or Soft key (OK).
The display goes back to the [Download
Menu] screen.
6. According to FTP, TFTP or HTTPS
that you selected in the [Protocol]
screen, proceed to the following
steps.
 When “ FTP” is selected here, go to
7
 When “ TFTP” is selected here, go
to 15
 When “ HTTPS” is selected here, go
to 7
7. Select “ Account Settings”.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press .
8. Select “ User ID”.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press .