NEC Univerge SV9300 - Page 64

TERMINAL SETUP
56
13. Enter the folder name where the
backup file is stored.
Please refer to INPUT CHARACTERS
for how to enter the character.
 Enter the name of the folder where the
files are stored on the server (including
path from root directory to the folder that
stored backup file).
 Press or Soft key (OK).
The display goes back to the [Account
Settings] screen.
14. Press or Soft key (Back).
15. Select “ Server Address”.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press .
16. Enter the IP address of
FTP/TFTP/HTTPS server with digit
keys.
Use for separator of IP address.
 After entering an IP address, press
or Soft key (OK).
The display goes back to the
[Backup/Restore] screen.
To enter the address (URI) of
FTP/TFTP/HTTPS, press Soft key
(IP/URI) to switch the display to the URI
input screen.
 Press Soft Key (IP/URI).
 By using the Dial keys, enter the
address (URI) of the server where the files
are stored.
Please refer to INPUT CHARACTERS
for how to enter the character.
 After entering addres (URI), press
or Soft key (OK).
The display goes back to the
[Backup/Restore] screen.