NEC Univerge SV9300 - HOLDING A CALL

TERMINAL SETUP
59
TO ANSWER A CALL USING HEADSET
While placing the handset on the terminal,
answer a call using the headset.
1. While hearing a ringing tone, press
Headset/Handset feature key
Headset/Handset.
feature key lamp lights red. →
2. Start conversation with calling
party.
3. Press Headset/Handset feature key
once again, after finishing a call.
Headset/Handset feature key lamp goes
off. →
Line key lamp lights off. →
During a call in progress using handset,
you can switch to the headset by
pressing the Headset/Handset feature
key.
It is possible to answer a call by
pressing line key after pressing the
Headset/Handset feature key. Also you
can answer a call by pressing Answer
key after pressing the Headset/Handset
feature key. For details, please contact
the system administrator.