NEC VERSA P - Cleaning the Versatrack; Locating the Versatrack Ball

Troubleshooting and Repair 4-5
Cleaning the VersaTrack
Use the steps below to clean the ball and roller inside the VersaTrack.
1. Turn off system power.
2. Position the system with the VersaTrack facing up.
3. Pull open the VersaTrack cover and remove the cover.
Figure Section 4-1 Locating the VersaTrack Ball
4. Tip the system and remove the ball.
5. Use an anti-static, lint-free cloth to clean the ball and the roller in the VersaTrack
socket. If erratic VersaTrack performance persists, use isopropyl alcohol and a
lint-free cloth to clean the ball.
6. Place the ball back in its socket, align the VersaTrack cover with the system, and
press the cover to secure it in place.
VersaTrack
VersaTrack
Cover