5-26 Troubleshooting and Options for the Docking Station II
External Keyboard and Mouse Installation
Use the following steps to install an external keyboard or mouse in the Docking Station II.
First, read “Docking Station II Options” earlier in this section for pre-installation guidelines.
1. Locate the keyboard port on the front of the Docking Station II. Insert the key-
board cable connector in the port.
2. Locate the mouse port on the front of the Docking Station II. Insert the mouse
cable connector in the port.
Figure Section 5-33 Keyboard and Mouse Connection
3. Power on the Docking Station II.
Mouse Port
Keyboard Port
To Next Page
Loading...
