NEC VERSA P - Parameter Descriptions; Comms

2-12 Setup and Operation
Table Section 2-6 Auto Setup Parameter Options
Menu Default Setting
Keyboard
Typematic Rate Normal
NumLock Boot Status NumLock Off
System Password Disable
Keyboard Lock Hot Keys Disable
Power
Power Management High
Power Management under AC Disable
BackLight Full
HighLight Full
System Sound Power Enable
PCMCIA Power Enable
Suspend Warning Tone Enable
Resume on Serial Port Ring Disable
Resume on Time of Day Disable
System
Quick Boot Disable
Setup Lock Disable
Time/Date
Time HR:MIN:SEC
Date MO/DAY/YEAR
Parameter Descriptions
Read the following for an understanding of each parameter's function.
Comms
This menu item changes the I/O address for the serial and parallel ports. Change the default
address and interrupt level only if a conflict exists. The Comms menu also sets the parallel
port mode.
For system security, disable a port entirely by selecting the “Disable” setting.