Options 3-25
NEC VERSA PORT REPLICATOR
The NEC Versa Port Replicator duplicates the ports on the computer's rear panel. When
returning to the office, it provides a convenient way to reconnect the Versa P to peripherals.
NOTE: Power off the Versa P before installing
or removing the port replicator.
1. Turn off system power. Disconnect the AC adapter (if installed).
2. Close the LCD.
3. Open the computer's right rear cover.
Figure Section 3-4 Opening the Versa's Right Rear Cover
Right-Rear Cover
To Next Page
Loading...
