Troubleshooting and Repair 4-25
CPU Board
Use the following steps to remove the CPU board (see Figure Section 4-16).
1. Turn off system power. Remove the AC adapter or battery pack (if installed).
2. Remove the following as previously described.
n primary battery pack
n diskette drive
n hard disk drive
n memory card
n any options
n LCD
n top cover
n keyboard
n LCD indicator panel
3. Disconnect the CMOS battery from connector P8 on the CPU board.
4. Lift the CPU board out of connectors P1 and P2.
Figure Section 4-16 CPU Board Removal
CPU Board
To Next Page
Loading...
