Troubleshooting and Repair 4-19
Top Cover, Keyboard
Use the following steps to remove the top cover and/or keyboard.
1. Turn off system power. Remove the AC adapter if connected.
2. Remove the following:
n diskette drive
n primary battery pack
n memory compartment cover
n hard disk drive cover
n hard disk drive
n any options
n LCD.
3. Locate the six screws on the bottom of the system. Remove the six screws. Four
screws are normal size and two are the long-type.
Figure Section 4-9 Locating Screws
Long ScrewsScrews (1 of 6)
To Next Page
Loading...
