Troubleshooting and Options for the Docking Station II 5-3
DISASSEMBLY AND REASSEMBLY
This subsection contains step-by-step disassembly procedures for the Docking Station II.
Each procedure is supported by a simplified disassembly illustration to facilitate removal.
The detailed exploded-view diagram and parts list for the unit is shown later in this subsec-
tion. For complete disassembly of the unit, follow the disassembly order listed in Table Sec-
tion 5-2 to reassemble, follow the table in reverse order.
Table Section 5-2 Disassembly Parts Sequence
Sequence Part See Page
1 CRT Base/Top Cover Assembly 5-4
2 Top Cover Mask Assembly 5-6
3 Blank Panels 5-6
4 Power Switch Assembly 5-6
5 Interface Board 5-8
6 Backplane Board 5-10
7 LED Panel Board 5-12
8 Sound Board 5-13
9 Drive Signal Cables 5-13
10 Power Supply (PU619) 5-15
To Next Page
Loading...
