NEC VERSA P - CRT Base Removal; Top Cover Screw; CRT Base;Top Cover Assembly

5-4 Troubleshooting and Options for the Docking Station II
CRT Base/Top Cover Assembly
Use the following steps to remove the CRT base cover or the top cover assembly.
1. Remove the CRT base from the Docking Station II.
Figure Section 5-1 CRT Base Removal
2. To remove the top cover, first remove the screw on the Docking Station II's rear
panel.
Figure Section 5-2 Top Cover Screw
Tabs
Notches
CRT Base