2-14 Setup and Operation
n BackLight Sets the LCD backlight to standard or full.
n HighLight Sets the character brightness to standard or full.
n System Sound Power Allows you to turn off the speaker amplifier to save
system power.
n PCMCIA Power Allows you to turn off the power to the PCMCIA slots.
n Suspend Warning Tone Enables or disables a warning tone signaling Sus-
pend/Resume. It is strongly recommended to keep this option enabled.
NOTE: The suspend warning tone is disabled if
System Sound Power is set to disabled.
n Power Management under AC Allows the use of power management features
when AC power is connected.
n Resume on Serial Port Ring System automatically powers on when data is re-
ceived via a serial port modem.
n Resume on Time of Day Enables the user to specify a time of day to automati-
cally power on.
System
Use this menu to add to the system's overall performance.
n Quick Boot Reduces boot time by deleting unnecessary power-on self-tests.
n Setup Lock Disables Auto Setup to prevent unauthorized users from viewing
or changing system parameters at power-on.
Time/Date
Sets the current time and date in military format. To set the time, enter the hour, minute,
and seconds in hh:mm:ss, 24-hour format. For example, type 14:30:00 for 2:30 p.m. Enter
the current day, month, and year for example, mm/dd/yyyy. For example, to enter October
7, 1994, type 10/07/1994.
Remember to type any preceding zeroes. For example, to enter 7:20 a.m., type 07:20:00.
To Next Page
Loading...
