Doc. Name: NMC-PRO ׀ User Guide Ver 3.05.03 Revision: 2.2 Page: 43
Crop Management Technologies
Measurements
7.
Calculated position – Targeted position of the screen
8.
Measured position – Current position of the screen
9.
Control type – Method of which the screen movement is measured (time/measured)
10.
Measured mV – Current mV read by the potentiometer corresponding with the
screen position
11.
Curve mV – Defined position of the screen according to the mV read by
potentiometer during calibration
12.
Limitations – Restrictions on calibration process due to higher priority processes
To Next Page
Loading...
