Doc. Name: NMC-PRO ׀ User Guide Ver 3.05.03 Revision: 2.2 Page: 9
Crop Management Technologies
Change user level access?
Yes No
Program Ver.: 8.2.81
USER LEVEL ACCESS
There are three levels of access:
• Read Only (restricted)
All the parameters and menus are visible, but cannot be modified
• User (limited restriction)
Menus 1-7 are fully accessible and can be modified. Menu 8 can be viewed but not
edited
• Technician (unrestricted)
All menus are fully accessible and available for modifications
To change the operation mode:
1. On the Main Menu, press the LOG IN
key.
2. Use the arrow keys to select Yes.
3. Press Enter.
The controller recognizes the operation mode
according to the password that is entered:
USER LEVEL PASSWORD
Read Only 0000
User 9785 or 0101
USER LEVEL: READ ONLY
Please Enter Password
Program Ver.: 8.2.81
To Next Page
Loading...
