Doc. Name: NMC-PRO ׀ User Guide Ver 3.05.03 Revision: 2.2 Page: 88
Crop Management Technologies
CROP PROTECTION
PROGRAM – CROP PROTECTION (MENU 1.8)
The Crop Protection process in the green house does not operate on a regular basis, the
grower determines when it will activate.
The Crop protection program provides four steps. The user can enable/disable one or more
of the following steps:
1. Preparation – The vents will close completely
2. Spray – Crop Protection treatment is dispersed among the plants
3. Process – Time allowed for the treatment to sink into the plants
4. Purge – The vents are opened in order to clear the atmosphere in the green house
Crop Protection in GH
To Next Page
Loading...