Doc. Name: NMC-PRO ׀ User Guide Ver 3.05.03 Revision: 2.2 Page: 50
Crop Management Technologies
Heating network
12. Actual heat capacity – Displays the heat kW transferred to the zone from each
network
13. Calculated Min water temp – Displays the minimum temperature for the water with
the humidity influence considered
14. Max water temp – Displays the maximum temperature for the water as defined in
7.3.1 Heating ON/OFF Setup
15. Humidity influence on min temp – Displays the maximum heating network
temperature difference from the set minimum water temperature to the calculated
(calculated – taken from the Humidity influence parameter SETUP – Heating
Network menu 7.3.2)
16. Calculated water temp – Displays the target water temperature with all influences
considered
17. Measured water temp – Displays the current water temperature
To Next Page
Loading...
