Doc. Name: NMC-PRO ׀ User Guide Ver 3.05.03 Revision: 2.2 Page: 70
Crop Management Technologies
# Parameter Explanation Unit/Range Default
9.
Humidity limit pad
pump off
If the humidity inside the greenhouse
is higher than this value, then the
controller will turn off the pad pump.
% 90
Fan Stage Setup
10.
Fan stage when rain
During special events such as: rain,
storm, frost, external condition and
spread screen, each fan stage can be
set to react differently. Set whether
the fan should:
Off – Fan is OFF during event
On – Fan is ON during event
Prog – Fan continues working
according to what is defined in the
Fan&Pad Program
Off
On
Prog
Prog
11.
Fan stage when storm
12.
Fan stage when frost
13.
Fan stage with external
condition
14.
Fan stage when screen
is spread
To Next Page
Loading...
