Import/Export Settings
AirCheck G3 provides functionality for importing
and exporting saved test app settings for
transfer to additional units or exporting to Link-
Live to USB and other devices.
NOTE: You can import and export settings
only between the same kind of NetAlly
products. For example, both units must be
AirCheck G3s for a transfer to work.
The following apps enable you to import and
export settings and configurations:
l
AutoTest Settings, including Profile Groups
l
Discovery Settings
l
Discovery > Problem Settings
l
iPerf Settings
The AutoTest Settings are shown as an example
in the images below.
Software Management
135
To Next Page
Loading...