iPerf Settings
To run an iPerf test, you must configure your
AirCheck G3 unit to communicate with your iPerf
endpoint. You can manually enter an iPerf server
address, or select a NetAlly Test Accessory's
address in the iPerf settings.
Saving Custom iPerf Settings
The iPerf app allows you to save a configuration
of settings for running an iPerf test to the same
endpoint later.
Tap the save icon to load, save, import, and
export configured settings. See Saving App
Settings Configurations for more instructions.
Once you save a settings configuration, the
custom name you entered appears at the top of
iPerf Test App
615
To Next Page
Loading...