The NetAlly Test Accessory runs
network connection tests, uploads
results to Link-Live Cloud Service, and
acts as an iPerf server endpoint for iPerf
tests run by other NetAlly handheld
testers.
Learn more about the Test Accessory from
NetAlly.com/products/TestAccessory.
If you are using an iPerf server installed on a PC
or other device as an endpoint, iPerf version 3 is
required to run the AirCheck G3 iPerf test. You
can download iPerf server software from
https://iperf.fr.
iPerf Test App
614
To Next Page
Loading...