another measurement. AirMapper fills in the
line between the two measurements with
automatic measurements made at the
sampling period. See Collecting AirMapper
Data for more information.
2. Current Scan (Passive) (Passive)is the
default and preferred way to perform a
survey. It allows immediate data collection
based on the most recent APbeacon seen
from each BSSID. APBSSIDs age out after
140 seconds, and Wi-Fi clients age-out after
4 minutes.
3. Scan Once (Passive) is more precise but
more time-consuming. When a point is
selected, all the BSSID information is
cleared, and the unit acquires a single scan
of the selected channels for the selected
dwell time. This gives an exact
measurement. However, in congested envir-
onments any beacons not seen during the
dwell time are not included in that sample
point.
AirMapper™ App
576
To Next Page
Loading...