4. Connected (Active) collects data from the
linked connection of the Wi-Fi Test port.
NOTE:Selecting this method disables the
AirMapper settings for Dwell Time and
Override Bands and Channels.
Auto Sampling Period
(Enabled for Auto Sampling mode only.) Tap to
choose a preset sampling period or to enter a
custom value. This setting controls how
frequently an Auto Sampling survey takes
automatic measurements between points that
you select manually.
Dwell Time
(Enabled for passive survey modes only.) Tap to
choose a preset dwell time or enter a custom
value. See the General Settings for additional
information about dwell time.
AirMapper™ App
577
To Next Page
Loading...