you can double-tap the Recent
button at the bottom of the
screen to quickly toggle between
AirMapper and Autotest.
4. To stop or pause your survey, tap PAUSE, as
described above for a passive survey.
AirMapper Survey Tips
Use these additional tips to make your survey
process easier.
Changing Dwell Time During a Survey
NetAlly does not recommend that you change
settings during a survey. An exception is Dwell
Time, which sets the amount of time the
AirCheck G3 lingers on each channel to gather
data. You can increase the Dwell Time value to
get averages of beacon signal. To change the
Dwell Time setting:
1. Tap Pause to pause your survey.
2. Open the AirMapper settings, (tap the
navigation menu icon or swipe from the
left-side drawer).
AirMapper™ App
590
To Next Page
Loading...