Introduction to NetApp EF570 All-Flash Arrays:
Feature Overview with SANtricity 11.50.2
© 2019 NetApp, Inc. All Rights Reserved.
Hardware Options
Table 39 details how functions performed on hardware are completed in the SANtricity Storage Manager
AMW and how the same functions are completed employing the SANtricity System Manager.
Table 39) Hardware options: AMW compared with System Manager.
Turn On Storage Array Locator
Lights
Locate (controller/drive
tray, drive shelf)
Select Shelf Number drop-down
menu on left side of each shelf
and then select Turn on locator
light
Select drive and then select
Turn on locator light
Tray > View/Edit
(Controller/Drive
Components, Drive
Components)
• Select Shelf Number drop-
down menu on left side of
each shelf and then select
View settings
• Select one of the icons at the
top of each shelf.
View or edit
drive channels
Tray > View/Edit Drive
Channels
Select one of the controllers
and then select View settings >
Drive Interfaces tab
Select Shelf Number drop-down
menu on left side of each shelf
and then select Change ID
Tray > Change > Hardware
View Order
Select either the up or down
arrow on the right side of the
shelf to move it up or down in
the view.
Change shelf
battery
settings
Tray > Change > Battery
Settings
• Select Shelf Number drop-
down menu on left side of
each shelf and then select
View settings
• Select the battery icon at the
top of each shelf.
Change shelf
alarm settings
Tray > Change > Alarm
Settings
Not applicable for hardware platforms managed by System
Manager
Synchronize
controller
clocks
Controller > Synchronize
Clocks
Synchronize Storage Array
Clocks
To Next Page
Loading...
Need help?
General