123
GS748T Smart Switch
IGMP Snooping Querier VLAN Configuration
Use this page to configure IGMP queriers for use with VLANs on the network.
To access this page, click Switching
Multicast IGMP Snooping Querier Querier VLAN
Configuration.
To configure Querier VLAN settings:
1. T
o create a new VLAN ID for IGMP Snooping, select New Entry from the VLAN ID field
and complete the following fields:
• VLAN ID. S
pecifies the VLAN ID for which the IGMP Snooping Querier is to be
enabled.
• Querier Elec
tion Participate Mode. Enable or disable Querier Participate Mode.
• Disa
bled. Upon seeing another querier of the same version in the VLAN, the
snooping querier moves to the non-querier state.
• Enabled. Th
e snooping querier participates in querier election, in which the least
IP address operates as the querier in that VLAN. The other querier moves to
non-querier state.
• Sno
oping Querier VLAN Address. Specify the Snooping Querier IP Address to be
used as the source address in periodic IGMP queries sent on the specified VLAN.
2. Click App
ly to apply the new settings to the switch. Configuration changes take effect
immediately
3. T
o disable Snooping Querier on a VLAN, select the VLAN ID and click Delete.
4. Click Canc
el to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
5. Click Refresh
to update the page with the latest information from the switch.
To Next Page
Loading...
