NETGEAR GS748T - DHCP Filtering Configuration; Interface Configuration

75
GS748T Smart Switch
DHCP Filtering Configuration
Use the DHCP Filtering Configuration page to enable or disable the DHCP Filtering feature
on the switch.
To access the DHCP Filter Configuration page, click System
 Services  DHCP Filtering 
Configuration.
To configure global DHCP filtering settings:
1. In
the Admin Mode field, select Enable or Disable to turn the DHCP Filtering feature on
or off.
2. Click App
ly to apply the change to the system. Configuration changes take effect
immediately.
3. Click Canc
el to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
Interface Configuration
Use the DHCP Filtering Interface Configuration page to view and configure each port as a
trusted or untrusted port. Any DHCP responses received on a trusted port are forwarded. If a
port is configured as untrusted, any DHCP (or BootP) responses received on that port are
discarded.
To access the DHCP Filtering Interface Configuration page, click System
 Services  DHCP
Filtering
 Interface Configuration.