199
GS748T Smart Switch
3. When the selected Ingress Control Mode is an option other than Disable, select Enable or
Disable from the Status menu to specify the administrative status of the mode.
4. In the
Threshold field, specify the maximum rate at which unknown packets are forwarded.
The range is a percent of the total threshold between 0–100%. The default is 5%.
5. Click Canc
el to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
6. If you ma
ke changes to the page, click Apply to apply the changes to the system.
Port Security Configuration
Use the Port Security feature to lock one or more ports on the system. When a port is locked,
only packets with an allowable source MAC addresses can be forwarded. All other packets
are discarded.
To display the Port Security Configuration page, click Security
Traffic Control, and then
click the Port Security
Port Security Configuration link.
To configure the global port security mode:
1. I
n the Port Security Mode field, select the appropriate radio button to enable or disable
port security on the switch.
2. Click Canc
el to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
3. If you ch
ange the mode, click Apply to apply the change to the system.
To Next Page
Loading...
