EasyManuals Logo

NETGEAR GS748T User Manual

NETGEAR GS748T
302 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #226 background imageLoading...
Page #226 background image
226
GS748T Smart Switch
The following table describes the Switch Statistics displayed on the screen.
Field Description
ifIndex This object indicates the ifIndex of the interface table entry associated with
the processor of this switch.
Octets Received The total number of octets of data received by the processor (excluding
fra
ming bits, but including FCS octets).
Packets Received Without
Errors
The total number of packets (including broadcast packets and multicast
p
ackets) received by the processor.
Unicast Packets Received The number of subnetwork-unicast packets delivered to a higher layer
protoco
l.
Multicast Packets Received The total number of packets received that were directed to a multicast
ad
dress. This number does not include packets directed to the broadcast
address.
Broadcast Packets Received The total number of packets received that were directed to the broadcast
ad
dress. This does not include multicast packets.
Receive Packets Discarded The number of inbound packets which were chosen to be discarded, even
thoug
h no errors had been detected, in order to prevent their being delivered
to a higher layer protocol. A possible reason for discarding a packet could be
to free up buffer space.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS748T and is the answer not in the manual?

NETGEAR GS748T Specifications

General IconGeneral
Basic switching RJ-45 Ethernet ports quantity48
MAC address table16000 entries
Packet buffer memory1.632 MB
Maximum data transfer rate1 Gbit/s
Latency20 µs
I/O ports48 RJ-45 connectors for 10BASE-T, 100BASE-TX, and 1000BASE-T (Auto Uplink on all ports) 4 SFP slots for fiber Gigabit Ethernet modules
Dimensions (WxDxH)440 x 260 x 43 mm
Power requirements100-240VAC 50/60 Hz
Networking features10BASE-T, 100BASE-TX, 1000BASE-T
Connectivity technologyWired
Full duplexYes
Networking standardsIEEE 802.3x
Minimum system requirementsCategory 5 network cables Network card for each PC Network software (e.g., Windows)
Mean time between failures (MTBF)69930 h
SafetyUL listed (UL 1950)/cUL, IEC950/EN60950
LED indicatorsLink, Power
Power consumption (typical)70 W
Storage temperature (T-T)-10 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Weight4000 g

Related product manuals