NETGEAR GSM7228PS - Page 125

Chapter 10. ACLs | 125
ProSafe 7000 Managed Switch Release 8.0.3
a. Select Routing > Routing Table > Basic > Route Configuration. A screen similar to
the following displays.
b. Under Configure Routes, make the following selection and enter the following
information:
• In the Route Type list, select Static.
• In the Network Address field, enter 192.168.50.0.
• In the Subnet Mask field, enter 255.255.255.0.
• In the Next Hop IP Address field, enter 192.168.200.2.
c. Click Add.
7. Create an ACL with ID 101.
a. Select Security > ACL > Advanced > IP ACL. A screen similar to the following
displays.
b. In the IP ACL Table, in the IP ACL ID field, enter 101.
c. Click Add.
8. Create an ACL with ID 102.