124 | Chapter 10. ACLs
ProSafe 7000 Managed Switch Release 8.0.3
a. Select Routing > IP > Basic > IP Configuration. A screen similar to the following
displays.
b. Under IP Configuration, make the following selections:
• For Routing Mode, select the Enable radio button.
• For IP Forwarding Mode, select the Enable radio button.
c. Click Apply to enable IP routing.
5. Add a static route with IP address 192.268.40.0/24:
a. Select Routing > Routing Table > Basic > Route Configuration. A screen similar to
the following displays.
b. Under Configure Routes, make the following selection and enter the following
information:
• In the Route Type list, select Static.
• In the Network Address field, enter 192.168.40.0.
• In the Subnet Mask field, enter 255.255.255.0.
• In the Next Hop IP Address field, enter 192.168.200.2.
c. Click Add.
6. Create a static route with IP address 192.168.50.0/24:
To Next Page
Loading...
