Chapter 10. ACLs | 155
ProSafe 7000 Managed Switch Release 8.0.3
b. Click Add, and the Extended ACL Rule Configuration screen displays.
c. In the Rule ID field, enter 1.
d. For Action, select the Permit radio button.
e. In the Redirect Interface list, select 1/0/19.
f. In the Dst L4 Port list, select http.
g. Click Apply. The Extended ACL Rules screen displays, as described in the next step
in this procedure.
3. Create a rule to match every other traffic.
a. Select Security > ACL > Advanced > IP Extended Rules. A screen similar to the
following displays.
To Next Page
Loading...
