156 | Chapter 10. ACLs
ProSafe 7000 Managed Switch Release 8.0.3
b. Click Add, and the Extended ACL Rule Configuration screen displays.
c. In the Rule ID field, enter 2.
d. For Action, select the Permit radio button.
e. In the Match Every field, select True.
f. Click Apply. A screen similar to the following displays.
4. Bind the ACL with interface 1/0/1.
a. Select Security > ACL > Advanced > IP Binding Configuration. A screen similar to
the following displays.
b. In the Sequence Number field, enter 1.
c. In the Port Selection Table, click Unit 1 to display all the ports.
To Next Page
Loading...
