234 | Chapter 14. Security Management
ProSafe 7000 Managed Switch Release 8.0.3
• In the Network Number field, enter 192.168.1.0.
• In the Network Mask field, enter 255.255.255.0.
• In the Days field, enter 1.
• Click Default Router Addresses. The DNS server address fields display. In the
first Router Address field, enter 192.168.1.254.
• Click DNS Server Addresses. The router address fields display. In the first DNS
Server Address field, enter 12.7.210.170.
c. Click Add.
2. Configure a VLAN and include ports 1/0/23 and 1/0/24 in the VLAN:
a. Select Routing > VLAN > VLAN Routing Wizard. A screen similar to the following
displays.
b. Enter the following information:
• In the Vlan ID field, enter 192.
• In the IP Address field, enter 192.168.1.254.
• In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1. The ports display:
• Click the gray box under port 23 twice until U displays.
• Click the gray box under port 24 twice until U displays.
The U specifies that the egress packet is untagged for the port.
d. Click Apply to save the VLAN that includes ports 23 and 24.
3. Configure a VLAN and include port 1/0/48 in the VLAN:
To Next Page
Loading...
