Chapter 14. Security Management | 241
ProSafe 7000 Managed Switch Release 8.0.3
a. Select Security > Port Authentication > Advanced > Port Authentication. A
screen similar to the following displays.
b. Scroll down and select the Interface 1/0/19 check box. Now 1/0/19 appears in the
Interface field at the top.
c. In the Control Mode list, select Force Authorized.
d. Click Apply to save the settings.
6. Enable dot1x on the switch.
a. Select Security > Port Authentication > Server Configuration. A screen similar to
the following displays.
b. For Administrative Mode, select the Enable radio button.
c. In the Login list, select dot1xList.
d. Click Apply to save settings.
7. Configure the RADIUS authentication server.
a. Select Security > Management Security > Server Configuration. A screen similar
to the following displays.
b. In the Server Address field, enter 10.100.5.17.
To Next Page
Loading...
