NETGEAR GSM7228PS - Page 242

242 | Chapter 14. Security Management
ProSafe 7000 Managed Switch Release 8.0.3
c. In the Secret Configured field, select Yes.
d. In the Secret field, enter 123456.
e. In the Primary Server field, select Yes.
f. In the Message Authenticator field, select Enable.
g. Click Add.
8. Enable accounting.
a. Select Security > Management Security > RADIUS > Radius Configuration. A
screen similar to the following displays.
b. In the Server Address field, enter 10.100.5.17.
c. In the Accounting Mode field, select Enable.
d. Click Apply.
9. Configure the accounting server.
a. Select Security > Management Security > RADIUS > Radius Accounting Server
Configuration. A screen similar to the following displays.
b. In the Accounting Server Address field, enter 10.100.5.17.
c. In the Accounting Mode field, select Enable.
d. Click Apply.