Chapter 26. PIM | 395
ProSafe 7000 Managed Switch Release 8.0.3
d. Click Apply.
8. Enable multicast globally.
a. Select Routing > Multicast > Global Configuration. A screen similar to the
following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
9. Enable PIM-DM globally.
a. Select Routing > Multicast > PIM-DM > Global Configuration. A screen similar to
the following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
10. Enable PIM-DM on interfaces 1/0/21,1/0/22, and 1/0/24.
To Next Page
Loading...
