396 | Chapter 26. PIM
ProSafe 7000 Managed Switch Release 8.0.3
a. Select Routing > Multicast > PIM-DM > Interface Configuration. A screen similar
to the following displays.
b. Scroll down and select the Interface 1/0/21, 1/0/22, and 1/0/24 check boxes.
c. In the Admin Mode field, select Enable.
d. Click Apply to save the settings.
11. Enable IGMP globally.
a. Select Routing > Multicast > IGMP > Global Configuration. A screen similar to the
following displays.
b. For Admin Mode, select the Enable radio button.
c. Click Apply.
12. Enable IGMP on interface 1/0/24.
a. Select Routing > Multicast > IGMP > Interface Configuration. A screen similar to
the following displays.
To Next Page
Loading...
