NETGEAR GSM7228PS - Page 448

448 | Chapter 28. MLD
ProSafe 7000 Managed Switch Release 8.0.3
a. Select Routing > IPv6 > Advanced > Interface Configuration. A screen similar to
the following displays.
b. Scroll down and select the Interface 1/0/21 and 1/0/24 check boxes.
c. Enter the following information:
• In the IPv6 Mode field, select Enable.
• In the Routing Mode field, select Enable.
• In the Admin Mode field, select Enable.
d. Click Apply to save the settings.
4. Assign an IPv6 address to 1/0/21.
a. Select Routing > IPv6 > Advanced > Prefix Configuration. A screen similar to the
following displays.
b. In the Interface field, select 1/0/21.
c. Enter the following information:
• In the IPv6 Prefix field, enter 2001:1::2.
• In the Prefix Length field, enter 64.
• In the EUI64 field, select Disable.
d. Click Add to save the settings.