Chapter 28. MLD | 449
ProSafe 7000 Managed Switch Release 8.0.3
5. Assign an IPv6 address to 1/0/24.
a. Select Routing > IPv6 > Advanced > Prefix Configuration. A screen similar to the
following displays.
b. Under IPv6 Interface Selection, in the Interface field, select 1/0/24 .
c. Enter the following information:
• In the IPv6 Prefix field, enter 2001:3::1.
• In the Prefix Length field, enter 64.
• In the EUI64 field, select Disable.
d. Click Add to save the settings.
6. Configure the router ID of OSPFv3.
a. Select Routing > OSPFv3 > Basic > OSPFv3 Configuration. A screen similar to the
following displays.
b. In the Router ID field, enter 2.2.2.2.
c. For Admin Mode, select the Enable radio button.
d. Click Apply.
7. Enable OSPFv3 on interfaces 1/0/21 and 1/0/24.
To Next Page
Loading...
