86 | Chapter 7. OSPF
ProSafe 7000 Managed Switch Release 8.0.3
2. Assign IP address 192.168.10.1 to port 2/0/11.
a. Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to
the following displays.
b. Scroll down and select the interface 2/0/11 check box. Now 2/0/11 appears in the
Interface field at the top.
c. Enter the following information:
• In the IP Address field, enter 192.168.10.1.
• In the Network Mask field, enter 255.255.255.0.
• In the Admin Mode field, select Enable.
d. Click Apply to save the settings.
3. Assign IP address 192.168.20.1 to port 2/0/19.
a. Select Routing > IP > Advanced > IP Interface Configuration. A screen similar to
the following displays.
b. Scroll down and select the interface 2/0/19 check box. Now 2/0/19 appears in the
Interface field at the top.
c. Enter the following information:
• In the IP Address field, enter 192.168.20.1.
• In the Subnet Mask field, enter 255.255.255.0.
• In the Admin Mode field, select Enable.
d. Click Apply to save the settings.
To Next Page
Loading...
