Chapter 7. OSPF | 87
ProSafe 7000 Managed Switch Release 8.0.3
4. Specify the router ID, and enable OSPF for the switch.
a. Select Routing > OSPF > Basic > OSPF Configuration. A screen similar to the
following displays.
b. Under OSPF Configuration, in the Router ID field, enter 2.2.2.2.
c. Click Apply to save the settings.
5. Enable OSPF on port 2/0/11.
a. Select Routing > OSPF > Advanced > Interface Configuration. A screen similar to
the following displays.
b. Scroll down and select the interface 2/0/11 check box. Now 2/0/11 appears in the
Interface field at the top.
• In the OSPF Area ID field, enter 0.0.0.0.
• In the OSPF Admin Mode field, select Enable.
c. Click Apply to save the settings.
6. Enable OSPF on port 2/0/19.
To Next Page
Loading...
