The default user name is admin. The password is the one that you specified the first time that you
logged in.The user name and password are case-sensitive.
The Dashboard page displays.
4. Select Management > Configuration > System > Advanced > LED Control.
The LED Control page displays.
5. Select one of the following radio buttons:
• Enable All LEDs. All LEDs are enabled.This is the default setting.
• Disable All LEDs. All LEDs are disabled.
• Enable Power LED. All LEDs are disabled except for the Power LED.
6. Click the Apply button.
Your settings are saved.
Manage and Maintain the Access Point
109
Insight Managed Smart Cloud Wireless Access Point WAC505 User Manual
To Next Page
Loading...
