NETGEAR WAC505 User Manual

a. Replace or merge the MAC addresses in the import list with the MAC addresses in the Known AP
List by selecting one of the following radio buttons:
• Replace. MAC addresses in the Known AP List are replaced with the ones in the import list.
• Merge. MAC addresses in the Known AP List are merged with the ones in the import list.
b. Click the Browse button and navigate to and select the import file.
The MAC addresses on the import list are placed in the Known AP List.
c. To remove a MAC address from the Known AP List, select the MAC address and click the Delete
button.
When you remove the device from the Known AP List, the device is not moved to the Unknown AP
List.
8. Click the Apply button.
Your settings are saved.
Set Up RADIUS Servers
If you use WPA2 Enterprise security or a RADIUS MAC ACL, you must set up RADIUS servers for
authentication, accounting, or both authentication and accounting using RADIUS.You must set up primary
IPv4 servers and you can set up secondary IPv4 servers.These RADIUS server settings apply either to all
WiFi networks that use WPA2 Enterprise security (see Set Up an Open or Secure WiFi Network on page
30) or to all WiFi networks that use a RADIUS MAC ACL.
WPA2 Enterprise security and a RADIUS MAC ACL are mutually exclusive. If you
want to use a RADIUS MAC ACL for a WiFi network, select a different type of WiFi
security (see Set Up an Open or Secure WiFi Network on page 30). If you want to
use WPA2 Enterprise security for a WiFi network, use a local MAC ACL (see Manage
Local MAC Access Control Lists on page 69).
Note
If you use a RADIUS MAC ACL, you must define the ACL on the RADIUS server, using the format in the
following example for client MAC addresses in the RADIUS server: If the client MAC address is
00:0a:95:9d:68:16, specify it as 000a959d6816 in the RADIUS server.
To set up RADIUS servers:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
3. Enter the access point user name and password.
The default user name is admin. The password is the one that you specified the first time that you
logged in.The user name and password are case-sensitive.
The Dashboard page displays.
Manage Access and Security
80
Insight Managed Smart Cloud Wireless Access Point WAC505 User Manual

NETGEAR WAC505 Specifications

General

2.4 GHz	Yes
Networking standards	IEEE 802.11i, IEEE 802.3af, IEEE 802.3at
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	1167 Mbit/s
Maximum data transfer rate (5 GHz)	867 Mbit/s
Maximum data transfer rate (2.4 GHz)	300 Mbit/s
Output current	2.5 A
Output voltage	12 V
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Internal	No
Placement	Ceiling, Wall
Product color	White
Security algorithms	802.1x RADIUS, EAP, EAP-TLS, PEAP, TTLS, WPA, WPA-PSK, WPA2, WPA2-PSK
Service Set Identifier (SSID) features	SSID broadcast on/off
Antenna gain level (max)	4 dBi

Weight and Dimensions

Depth	165 mm
Width	175 mm
Height	35 mm
Weight	256 g