DescriptionSetting
IP address in the range that is used by your LAN (usually 255.255.255.0).IP Address
The subnet mask must be compatible with your LAN.Subnet Mask
IP address of the gateway on your LAN.Gateway
IP address of the primary Domain Name System (DNS) server on your LAN.Primary DNS
IP address of the secondary DNS server on your LAN, or leave this field blank.Secondary DNS
7. Click the Apply button.
Your settings are saved. The access point restarts with the new IP settings.
Enable the DHCP Client
By default, the DHCP client of the access point is enabled and the access point receives an IP address from
a DHCP server (or a router that functions as a DHCP server) in your network.
If you disabled the DHCP client, you can reenable it.
To enable the DHCP client:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
3. Enter the access point user name and password.
The default user name is admin. The password is the one that you specified the first time that you
logged in.The user name and password are case-sensitive.
The Dashboard page displays.
Manage the Local Area Network and IP Settings
84
Insight Managed Smart Cloud Wireless Access Point WAC505 User Manual
To Next Page
Loading...
